Certified technicians, professional drying equipment and moisture readings you can see for yourself. No guesswork.
Filing a claim is easier with good records. We document everything and talk to your adjuster for you.
You get a straight answer on cost up front, with every line explained and nothing hidden.
When you call about attic water damage, you reach a restoration team that works in Carlsbad every day. We tell you what it will take, give you a clear quote and get a crew moving.
There are two ways an attic ends up wet. From above, rain enters through failed flashing, worn shingles, or the seals at chimneys and vents. Moisture also rises from the house below and condenses on cold roof sheathing when the attic is not ventilated well. Either way, hardly anyone goes up there to look. Our team in Carlsbad inspects the attic, finds the source, and dries it out.
Wet insulation is the heart of most attic jobs. Fiberglass and cellulose both lose R-value when they get wet, so the home costs more to heat and cool. Worse, soaked insulation holds water against the ceiling drywall and the framing for weeks. Our process is to pull the saturated insulation, dry the wood using dehumidifiers and air movers, and treat mold found on rafters or sheathing.
Rain that gets past the roof lands in the insulation, which absorbs it. Because the rooms below show nothing, the leak is missed and no roof repair happens.
Mold does very well on wet paper facing and damp lumber when the attic is warm and the air is still. It can start on the back side of the ceiling drywall and on the sheathing.
After repeated wetting, the insulation is saturated and water reaches the ceiling. In the room underneath, brown rings show up and the drywall may begin sagging.
Roofing nails loosen as the sheathing delaminates. Rafters stay damp enough to decay, and mold covers large areas of the roof deck.
We save what can be dried properly and remove only what cannot. Moisture readings make that call, not guesswork.
Ask a Tech: (720) 208-4006| Material | Can usually be saved when | Has to be replaced when |
|---|---|---|
| Rafters and joists | The wood is solid, with only surface stains or a little mold | A screwdriver pushes into rotted wood, or the member has cracked |
| Recessed lights and wiring | An electrician finds them dry, clean and free of corrosion | Rust on the connections, or water inside the housing |
| Fiberglass insulation | Quick drying of a small area that took clean rainwater | Matted, dirty, moldy, or wet for more than a few days |
| Insulated ductwork | Outer jacket is intact and the insulation inside stayed dry | Wet or moldy wrap, or duct sagging from the weight of water |
| Cellulose insulation | Only the surface is damp and it is still loose | Soaked through or packed down, which is most of the time |
To learn whether you have a leak, condensation or the two together, we go over the roof deck, the vents, the exhaust ducts and each flashing point. Thermal imaging and moisture meters show how far it reached.
Insulation that is soaked or has mold gets bagged and carried out, giving the wood and the drywall below a chance to dry. Rooms under the attic are protected, and the route in and out stays contained.
With dehumidifiers and air movers, the sheathing, joists and rafters return to normal moisture levels. Visible mold is cleaned from the wood and an antimicrobial is applied.
We point out the roof or ventilation problem that needs correcting and can share our findings with your roofer. When the attic has stayed dry, the R-value is restored with new insulation.
Air handlers, with their drain pans and condensate lines, sit in many attics. A clogged drain or an overflowing pan drips into the insulation for weeks, with no storm to warn you.
Compressed, damp insulation does very little insulating, and it may not recover after it dries. Energy bills climb, and the rooms below the wet area are hotter or colder than the rest.
A bathroom fan that vents into the attic instead of outdoors adds warm, moist air every day. The condensation it leaves on the sheathing can pass for a roof leak.
The underside of the roof deck is a common place for mold when ventilation is poor. A wide area may be covered by the time somebody climbs up to check.
Have a different question? Call us and we will answer it over the phone.
Call (720) 208-4006Don't wait for small problems to become expensive emergencies. Call Carlsbad Restoration for fast, reliable service.
Call (720) 208-4006 Now